- Dynaudio FAQ
- Home Audio | Focus
-
Downloads - Manuals & Firmware
-
FAQ - Frequently Asked Questions
-
Passive speakers | Frequently asked questions
-
Home Audio | Focus
-
Dynaudio Music | Frequently asked questions
-
Dynaudio Xeo | Frequently asked questions
-
Dynaudio Focus XD | Frequently asked questions
-
Dynaudio Professional Audio | Frequently asked questions
-
Dynaudio Car Audio | Frequently asked questions
-
Dynaudio CI | Frequently Asked Questions
-
Home spare part
First time setup
The setup process is simplified through the guided procedure within the app. Make sure you follow the steps in the setup guide.
- Download and install the Dynaudio Set-up and Control app.
- Connect both speakers to power and set the power switch to “on”.
- Depending on the firmware version, the front LED will light up either red or white. Wait until the LED starts flashing white, usually within 2 minutes.
- Follow the set-up guide within the app to connect the speakers to your network.