Installation really couldn’t be easier. There are three main steps, and they’re common to both the round in-ceiling and rectangular in-wall models.
1. Install the frame
The innovative clip-frame fits into the wall or ceiling cut-out. Then it’s fixed in place with the yellow securing clamps. You can loosen these and simply adjust as many times as you want without ever damaging the drywall. (And note: the rectangular frame can be fitted either way up.)
2. Mount the speaker
Connect the speaker cable to the terminals, then push the unit into the installation frame. Listen for the clicks as it locks in place. You can fine-tune the high-frequency balance by ±3dB with the switch on the baffle. Round speakers can be rotated in the frame to point the driver down (or across) to the listening position, while the tweeter can be angled for even greater control.
3. Attach the grille
It’s magnetic, so it just snaps into place.
For more information, including step-by-step video guides, visit www.dynaud.io/custominstall