- Home
- >
- Professional Audio
- >
- Dynaudio Acoustics Delta Amplifiers
- >
- Delta 80 Dsp
- Home
- >
- Professional Audio
- >
- Dynaudio Acoustics Delta Amplifiers
- >
- Delta 80 Dsp
Delta 80 DSP
Maximum power, sophisticated DSP and remote control. A total rack-star…
and transparent amplification of your mix.
Delta 80 DSP
Every model uses the highest-quality power-amplifier technology – so you know for a fact that what goes in, comes out exactly as intended. Only louder.
The 2U Delta 80 DSP yields a staggering 4x 2000W at 4 ohms – or 2x 4000W when bridged. And it does so without breaking a sweat, while delivering low distortion and noise figures. For instance, THD is as little as <0.18% at 1kHz.
Analogue or AoIP via Dante? Delta 80 DSP handles up to four channels; it’s a future-proof system that can keep up with whatever your studio throws at it. When using Dante, your audio is converted by 24-bit/96kHz DACs. And should the need for room tuning arise, you also get access to sophisticated DSP features. These span three dynamic and eight static EQ bands per input channel, and nine static EQ bands per output. Plus a suite of additional filters.
You also get wireless control via the DeltaDirect app for iPad, GPIO for remote control and monitoring and redundant back-up amp inputs. Want a stereo four-way system? Just connect to a Delta DSP amplifier with a single Cat 5 cable to eliminate the need for external processing.
Specifications
Networking | 2x RJ45 | 1000BASE-T, Dante, AES67 |
Thunderbolt | 2x Thunderbolt 3 | 2x15 Watts PD |
ADAT | Toslink 2x In, 2x Out | 16 channels total, can be configured as S/PDIF |
AES3 | DB25 | 8CH AES3 (16 Audio Channels) |
Word Clock | 2x BNC | WC In/Out |
MADI | 2x BNC | MADI In/Out |
Headphone | 2x TRS (Front) | 18-600 Ohm |
Expansion | DAD Expansion Modules | 1 available slot |
C13 | 90-260 VAC (Max 120W) |
Chassis | 19", 1 RU |
Depth | 32 cm / 12.6" |
Width | 43.5 cm / 17.2" |
Weight | 2.8 kg / 6.5 lbs |


Delta 80 DSP
Specifications
- Status Current
- Segment Pro
- Series Acoustic Amplifiers
- Type Amplifier
- Number of channels 4
- Output Power: (per channel)*
- 8 ohms 1000W
- 4 ohms 2000W
- 2.7 ohms 2200W
- 2 ohms 2000W*
- Output Power: (bridged)
- 8 ohms 4000W
- 4 ohms 4000W
- THD%: (@1dB below max output)
- @ 1kHz < 0.18%
- 20Hz to 20kHz < 0.2%
- Gain/Sensivity
- Gain 32dB
- Sensitivity (for max power) 8.3dBu
- Frequency response 20Hz to 20kHz (+ 0/- 0.5dB)
- Power Consumption: (< 5W in standby)
- Nominal @ 240v into 4 ohms 4.1A
- Nominal @ 120v into 4 ohms 8.2A
- Dimensions (HxWxD) / Weight
- (2 units) (mm) 88 x 482 x 428
- Single Box (UK shipping) (2 units) (mm) 230 x 580 x 560
- Double Box (outside UK) (2 units) (mm) 250 x 610 x 600
- Weight kg 10.3
- Weight lbs 22.7
- Boxed weight (kg) 11.8
- Boxed weight (lbs) 26.0
- * 2.7 ohm power quoted for highest single ended output and greatest efficiency (3 x 8 ohm parallel drivers). Amplifier is stable with 2 ohm Loads but output will be reduced.


Understanding Subwoofer Latency
Are you experiencing latent low-end? Out-of-phase phatness? Fear not! On this episode of Ask The Expert, Otto talks you through some very simple tweak...

How to calculate speaker loudness
On this episode of Ask The Expert, Otto explains how to calculate loudness – perfect if you've ever tried to figure out in advance how loud your syste...

EISA Awards 2025 - Confidence 20A & Contour 20 Black Edition
We’re thrilled to announce that two of our products have made the cut at the annual EISA awards in the below categories: • Confidence 20A - EISA Best ...
Dynaudio Delta Amplifiers
- Status:
- Segment:
- Series:
- Type:
- Number of channels:
- Output Power: (per channel)* :
- 8 ohms:
- 4 ohms:
- 2.7 ohms:
- 2 ohms:
- 50 ohms (100/70V line):
- Output Power: (bridged) :
- 8 ohms :
- 4 ohms:
- THD%: (@1dB below max output) :
- @ 1kHz:
- 20Hz to 20kHz:
- Gain/Sensivity:
- Gain:
- Sensitivity (for max power):
- Frequency response:
- Power Consumption: (< 5W in standby) :
- Nominal @ 240v into 4 ohms:
- Nominal @ 120v into 4 ohms :
- Dimensions (HxWxD) / Weight:
- (1 unit) (mm) :
- (2 units) (mm) :
- Single Box (UK shipping) (1 unit) (mm) :
- Single Box (UK shipping) (2 units) (mm) :
- Double Box (outside UK) (1 units) (mm) :
- Double Box (outside UK) (2 units) (mm):
- Weight kg:
- Weight lbs:
- Boxed weight (kg):
- Boxed weight (lbs):
- *:

Delta 80 DSP
- Current
- Pro
- Acoustic Amplifiers
- Amplifier
- 4
- 1000W
- 2000W
- 2200W
- 2000W*
- 4000W
- 4000W
- < 0.18%
- < 0.2%
- 32dB
- 8.3dBu
- 20Hz to 20kHz (+ 0/- 0.5dB)
- 4.1A
- 8.2A
- 88 x 482 x 428
- 230 x 580 x 560
- 250 x 610 x 600
- 10.3
- 22.7
- 11.8
- 26.0
- 2.7 ohm power quoted for highest single ended output and greatest efficiency (3 x 8 ohm parallel drivers). Amplifier is stable with 2 ohm Loads but output will be reduced.

Delta 80
- Current
- Pro
- Acoustic Amplifiers
- Amplifier
- 4
- 1000W
- 2000W
- 2200W
- 2000W*
- 4000W
- 4000W
- < 0.18%
- < 0.2%
- 32dB
- 8.2dBu
- 20Hz to 20kHz (+ 0/- 0.5dB)
- 4.1A
- 8.2A
- 88 x 482 x 428
- 230 x 580 x 560
- 250 x 610 x 600
- 10.1
- 22.3
- 11.6
- 25.6
- 2.7 ohm power quoted for highest single ended output and greatest efficiency (3 x 8 ohm parallel drivers). Amplifier is stable with 2 ohm Loads but output will be reduced.

Delta 40 DSP
- Current
- Pro
- Acoustic Amplifiers
- Amplifier
- 4
- 500W
- 1000W
- 1400W
- 1200W*
- 2000W
- 2400W
- < 0.18%
- < 0.2%
- 32dB
- 6.2dBu
- 20Hz to 20kHz (+ 0/- 0.5dB)
- 2.9A
- 6.0A
- 88x 482 x 428
- 230 x 580 x 560
- 250 x 610 x 600
- 10.0
- 22.0
- 12.0
- 26.5
- 2.7 ohm power quoted for highest single ended output and greatest efficiency (3 x 8 ohm parallel drivers). Amplifier is stable with 2 ohm Loads but output will be reduced.

Delta 40
- Current
- Pro
- Acoustic Amplifiers
- Amplifier
- 4
- 500W
- 1000W
- 1400W
- 1200W*
- 2000W
- 2400W
- < 0.18%
- < 0.2%
- 32dB
- 6.2dBu
- 20Hz to 20kHz (+ 0/- 0.5dB)
- 2.9A
- 6.0A
- 88 x 482 x 428
- 230 x 580 x 560
- 250 x 610 x 600
- 10.0
- 22.0
- 12.0
- 26.5
- 2.7 ohm power quoted for highest single ended output and greatest efficiency (3 x 8 ohm parallel drivers). Amplifier is stable with 2 ohm Loads but output will be reduced