The Emit 2015 series
We’ve gone above and beyond to make sure that every speaker in the Emit range can be easily paired with different amplifiers and AV receivers. We designed them to be easy to position in your room, and we made sure that they can all be used as part of a stereo or surround-sound system.
Make no mistake: we’ve poured just as much enthusiasm, knowhow and innovation into our Emit range as we have into our ultra high-end Evidence loudspeakers. We don’t believe in cutting corners.
Take a close look at a pair of Emit speakers and you’ll find the same materials in their drivers as you’ll find on every other model in our range. You get the same Magnesium Silicate Polymer for the mid/bass drivers (a material we developed in-house in our Skanderborg factory), the same philosophy behind the precision-coated soft-dome tweeters, and the same lightweight aluminium voice-coils for greater precision, power-consistency and control.
And they’ve been designed, engineered and tuned by the same people who’ve produced some of the most cutting-edge, high-end loudspeakers of the past 40 years.
You’re in good hands.
Emit 2015
Specifications
- Status:
- Segment:
- Series:
- Type:
- Sensitivity (dB @ 2.83V/1m):
- IEC Power Handling (W):
- Rated Impedance (Ohm):
- Lower Cutoff (Hz @ +/- 3 dB):
- Upper Cutoff (kHz @ +/- 3 dB):
- Box Principle:
- Crossover:
- Crossover Frequency (Hz):
Emit M30
- Discontinued
- Home
- Emit
- Floorstand
- 86
- 200
- 4
- 40
- 23
- Bass reflex rear ported
- 2-way
- 1800 Hz
Emit M20
- Discontinued
- Home
- Emit
- Bookshelf
- 86
- 150
- 4
- 50
- 23
- Bass reflex rear ported
- 2-way
- 2600 Hz
Emit M10
- Discontinued
- Home
- Emit
- Bookshelf
- 86
- 150
- 6
- 50
- 23
- Bass reflex rear ported
- 2-way
- 1800 Hz
Emit M15 C
- Discontinued
- Home
- Emit
- Center
- 86
- 150
- 4
- 60
- 23
- Bass reflex rear ported
- 2-way
- 1800 Hz
Dynaudio Magazine
While it was just a TV show, that little speech at the beginning of the original Star Trek show really did do a good job of capturing our feelings about space.
Why use presets with Subwoofers?
If you're rocking a pair of Dynaudio speakers, then you should probably be rocking a Dynaudio Sub 6 too. Why? Well, as we explain on this episode of A...
Dynaudio Core firmware update version 1.1
July 2025 marks the release of firmware version 1.1 for our Core series of professional studio monitors – Core 7, Core 47, Core 59, and Core Sub. The ...
Acoustic panels to the rescue: fixing asymmetrical speaker setups
If you have a less than ideally shaped listening room in need of some acoustic treatment, then you might be feeling overwhelmed by how exactly you sho...
