M2
M2
Three-way midfield, with a wide range of applications
Stereo imaging is pinpoint accurate thanks to the computer optimised designs of the crossover and drivers, and the M2 is capable of SPLs of up to 125dB at 1.25m as a stand alone system.
Introduction
Three-way midfield, with a wide range of applications.Stereo imaging is pinpoint accurate thanks to the computer optimised designs of the crossover and drivers, and the M2 is capable of SPLs of up to 125dB at 1.25m as a stand alone system. When combined with a pair of Dynaudio Acoustics subwoofers, the system becomes a full 4 way main monitoring system capable of very high SPLs with a full frequency response down to below 35Hz.
The original design concept for the M2 was a compact near-to-midfield monitor, which would remove the need for larger built-in systems with their inherent problems of accuracy, installation and cost.
Every component of the M2 has been designed for both quality of reproduction and extreme reliability, and each driver can comfortably handle very high transients with no degradation of signal or components, leading to an outstanding dynamic response when coupled with a suitable amplifier with good current capabilities.
The result is a system which, in its various configurations, is the most flexible monitor package ever designed. By combining M2 with Dynaudio Acoustics subwoofer systems, it is possible to use one basic package for anything from desktop to main monitoring.
The M2 is essentially flat from 45Hz to 20kHz, and the specially designed bass, mid range and high frequency drivers are capable of reproducing impulsive transients of up to 1000W each without compression

M2
Specifications
- Status Discontinued
- Segment Pro
- Series M Series
- Type Nearfield Monitor
- Analog inputs Passive
- Maximum SPL (1m, pair) 130
- Lower Cutoff (Hz @85 dB +/- 3 dB) 34
- Upper Cutoff (kHz @ 85dB +/- 3 dB) 20
- Box Principle Front-loaded bass reflex
- Crossover 3-way
- Crossover Frequency (Hz) 900/4500 Hz
- Crossover Topology 2nd/3rd order
- Tweeter 1.1in soft dome
- Midrange 3" soft dome
- Midrange/Woofer 8in MSP
- Weight kg 36.3
- Weight lbs 80
- Width mm 340
- Height mm 680
- Depth mm 500
- Width inches 13 3/8
- Height inches 26 6/8
- Depth inches 19 5/8
The M Series Passive
- Status:
- Segment:
- Series:
- Type:
- Analog inputs:
- Maximum SPL (1m, pair):
- Lower Cutoff (Hz @85 dB +/- 3 dB):
- Upper Cutoff (kHz @ 85dB +/- 3 dB):
- Box Principle:
- Crossover:
- Crossover Frequency (Hz):
- Crossover Topology:
- Tweeter:
- Midrange:
- Midrange/Woofer:
- Weight kg:
- Weight lbs:
- Width mm:
- Height mm:
- Depth mm:
- Width inches:
- Height inches:
- Depth inches:

High-end audio on the road - choosing the sound for your car
On this episode of Ask the Expert, Mikael Ankersen gives you an introduction to the Dynaudio automotive audio universe. So, if you're a fan of high-en...

Mixing in Immersive - Going beyond stereo
On this episode of Ask the Expert, we're going beyond the realm of stereophonia! Stephen Entwistle gives some pointers on how to get stuck into mixing...

How to listen like a professional sound engineer
In this episode of Ask the Expert, we've got Stephen Entwistle in the hot seat, sharing pearls of wisdom on how to train your way to a great pair of c...