- Home
- >
- Custom Install
- >
- Performance Series
- >
- P4 W65
- Home
- >
- Custom Install
- >
- Performance Series
- >
- P4 W65
P4-W65
The right fit
Slimline in-wall speaker with a 6.5in woofer
P4-W65
The right fit. Slimline in-wall speaker with a 6.5in woofer.
What do you do if you don’t have the space for a full install system… but you still want a full install system? You could modify the wall, of course (which could mean big time and money); you could compromise on the speaker you put in the cavity (which would mean inferior sound); or you could go for this slimline in-wall model.The P4-W65 is just 63mm deep, so it will fit into ridiculously tight spaces with the same ease that you’d expect from a Dynaudio Custom speaker.Like all of our other speakers it uses a 28mm coated soft-dome tweeter and a Magnesium Silicate Polymer woofer (a 6.5in version, in this case). And it’s all housed in a one-piece chassis that secures into place with the turn of a few screws.You can fine-tune the tweeter’s response to -3dB, 0dB or +3dB to really tailor the speaker to the room. And, for the finishing touch, the included magnetic grille is paintable – so it can be coloured to fit seamlessly with the rest of the room’s décor.



P4-W65
Specifications
- Status Current
- Segment Custom Install
- Series Performance
- Type In-wall
- Sensitivity (dB @ 2.83V/1m) 87,5
- Rated Power 40
- Long Term Power 80
- Rated Impedance (Ohm) 8
- Impedance (Minimum) 5
- Lower Cutoff (Hz @ +/- 3 dB) 46
- Upper Cutoff (kHz @ +/- 3 dB) 20
- Crossover 2-way
- Tweeter 28 mm soft dome
- Midrange/Woofer 16.5 cm MSP
- Tweeter level options -3dB, 0dB, +3dB
- Width mm 198
- Height mm 296
- Depth mm 63
- Width inches 7 3/4
- Height inches 11 11/16
- Depth inches 2 1/5
- Width Cutout mm 175
- Height Cutout mm 275
- Height cutout inches 6 7/8
- Width cutout inches 10 7/8

Performance series
- Status:
- Segment:
- Series:
- Type:
- Sensitivity (dB @ 2.83V/1m):
- Rated Power:
- Long Term Power:
- Rated Impedance (Ohm):
- Impedance (Minimum):
- Lower Cutoff (Hz @ +/- 3 dB):
- Upper Cutoff (kHz @ +/- 3 dB):
- Crossover:
- Tweeter:
- Midrange/Woofer:
- Woofer:
- Tweeter level options:
- Diameter mm Ø:
- Width mm:
- Height mm:
- Depth mm:
- Diameter inches Ø:
- Width inches:
- Height inches:
- Depth inches:
- Diameter cutout mm:
- Width Cutout mm:
- Height Cutout mm:
- Diameter cutout inches:
- Height cutout inches:
- Width cutout inches:
- Grille material:
- Grille options:
- Grille attachment:
- Grille finish:
- Certifications:
- Environmental:

Understanding Subwoofer Latency
Are you experiencing latent low-end? Out-of-phase phatness? Fear not! On this episode of Ask The Expert, Otto talks you through some very simple tweak...

How to calculate speaker loudness
On this episode of Ask The Expert, Otto explains how to calculate loudness – perfect if you've ever tried to figure out in advance how loud your syste...

EISA Awards 2025 - Confidence 20A & Contour 20 Black Edition
We’re thrilled to announce that two of our products have made the cut at the annual EISA awards in the below categories: • Confidence 20A - EISA Best ...