Dynaudio Emit
Whatever your tastes, you'll hear the result of 45 years of painstaking research, development and listening experience. From the proprietary MSP cone material and fabric soft-dome tweeter technology Dynaudio has been using since 1977, to the up-to-the-minute Hexis inner dome and magnet systems, Emit lets you join the 'high-end club' in style.
Use them in stereo. Use them in a home-cinema system. Stream through them. Play your old vinyl records. Take your next step into authentic audiophile performance.
Hi-fi starts with Emit
Dipping your toe in the high-end water can be daunting. You want to trust that you’re spending your hard-earned money on the right thing – especially if you’ve never owned a separates system before.
The good news for you is that Emit will pay-back that trust – and then some. It might be the least expensive family in our range, but we’ve still packed it full of many of the advances you’ll find in our other, much higher-priced speakers. For one thing, it uses the same coated fabric soft-dome Cerotar tweeters we’ve deployed in the Evoke range. And those tweeters, in turn, derive their technology from the top-of-the-tree Confidence family and Core professional studio system. That’s pedigree.
The mid/bass drivers use Dynaudio’s own MSP (Magnesium Silicate Polymer) cones – made in one piece, with the integrated dust-cap bonded directly to the voice-coil motor behind them for even better stability and clarity. You’ll find that design philosophy running all the way back to our very first models, produced in 1977.
Emit crossovers
Emit’s crossovers were designed and tuned by the same team as Confidence, Evoke, Contour i, Special Forty, Core, Heritage Special and more.
The range uses a mix of first-, second- and fourth-order designs depending on the speaker, and its drivers. We’ve mixed topologies because we don’t believe in one-size-fits-no-one methods merely to cut costs. Each speaker in the Emit family has been custom tuned using the best tools for the job. Sure, it took longer, but the results are well worth hearing.
All the loudspeakers in the Emit family were measured in our vast Jupiter testing facility at Dynaudio Labs. It’s a huge 13 x 13 x 13m room in the heart of our R&D building, in the middle of which lurks a vast 6m robotic measuring array. It’s bristling with 31 microphones that measure the speakers’ impulse response, allowing our team of engineers to optimise their performance in near real-time. You can find out more about Jupiter here.
The clean cabinets
The clean, unfussy cabinets were designed and styled by the people who’ve been behind some of our most famous speakers – all at our HQ in Denmark.
They’re available in three custom laminate finishes (Black, White and Walnut), designed to complement any set-up (including if you want them to be unobtrusive in a multichannel system). All speakers in the series come with black magnetic grilles.
Emit is hi-fi, distilled. Plug in a pair and you’ll experience the very essence of your collection, whether that’s a stock of CDs, streaming playlists or a library of your favourite films. Astonishing consistency between speakers in the family means that wild panning effects stay locked-in, and stereo systems sing in total harmony.
There’s no better way to start your audiophile journey.
Specifications
- Status:
- Segment:
- Series:
- Type:
- Sensitivity (dB @ 2.83V/1m):
- IEC Power Handling (W):
- Rated Impedance (Ohm):
- Lower Cutoff (Hz @ +/- 3 dB):
- Upper Cutoff (kHz @ +/- 3 dB):
- Lower Cutoff (Hz @ -6 dB):
- Upper Cutoff (kHz @ -6 dB):
- Box Principle:
Emit 10
- Current
- Home
- Emit
- Bookshelf
- 86
- 150
- 6
- 64
- 25
- 52
- 35
- Bass reflex rear double flared port
Emit 20
- Current
- Home
- Emit
- Bookshelf
- 86
- 160
- 6
- 53
- 25
- 42
- 35
- Bass reflex rear double flared port
Emit 25C
- Current
- Home
- Emit
- Center
- 87
- 180
- 4
- 53
- 25
- 46
- 35
- Bass reflex rear double flared port
Emit 30
- Current
- Home
- Emit
- Floorstand
- 88
- 180
- 4
- 55
- 25
- 39
- 35
- Bass reflex rear double flared port
Emit 50
- Current
- Home
- Emit
- Floorstand
- 86
- 240
- 4
- 33
- 25
- 28
- 35
- Bass reflex rear double flared port
Dynaudio Magazine
Dynaudio Magazine is our universe of sound and music-related articles, videos, and podcasts, covering everything from loudspeakers and technology to extraordinary people, and our very best tips and tricks.
Damaged speakers? How do I know?
Have you ever accidentally dimed your amp or had some other kind of mishap, giving you cause to fear for your speakers' safety? Have no fear. More tha...
Four new products on show - High End Munich 2024
We’re going to give an exclusive first-look at four brand-new products during this year’s High-End show in Munich – as well as showing off some exciti...
What kind of subwoofer should I choose? Sealed or ported?
On this episode Ask The Expert, we're discussing subwoofer design, and the pros and cons of sealed-box versus ported designs in the world of low end d...
