Emit 30

Hi-fi starts with Emit

Compact floorstanders for stereo and surround

FIND A DEALER
BOOK LISTENING SESSION

Emit 30

Emit 30 is perfect for larger stereo systems or compact multi-channel home cinema set-ups in medium to large rooms.

If you’re looking for a little more power from your system, you’ve found it. Emit 30 is a compact two-and-a-half-way speaker designed to impress whether it’s used as a stand-alone stereo pair or as part of a 5.1-channel (or more) home cinema.

Like its little brother, Emit 10, it uses 14cm MSP woofers similar to those used in the Evoke series – this time doubled-up in each speaker for more low-frequency muscle, plus midrange clarity and punch. MSP stands for Magnesium Silicate Polymer. It’s a material we developed in-house for our woofer cones, and have used for decades – including on our most-lauded high-end models. MSP provides precisely the right combination of lightness, stiffness and damping (one we’ve tuned and honed over the years) to deliver control and outright power exactly where it’s needed.

Premium woofer technology

The cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece.

Using fewer moving parts gives our engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume.

Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes – it’s a lesson we learned developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in our entry-level family.

The target for all that flux is the voice-coil. We use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means we can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement. There’s a twist, though (please pardon the pun): we’ve coated the aluminium wire in a very thin copper coating to further increase the control the amplifier has on the voice-coil. More force with only a fractional weight gain: win-win.

DynaudioEmit30_Walnut_04-1

High-performance Cerotar tweeter

While the twin 14cm mid/bass units deal with the… well, midrange and bass… the upper frequencies are handled by the tweeter.

Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed.

The 28mm coated soft-dome diaphragm is backed up by the clever Hexis inner dome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminium voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue – perfect if you’re given to long listening sessions (and you’re music lovers, so we bet you are).

The bass-port on the back panel has dual flares (one inside; one outside), and has been tuned to minimise unwanted ‘chuffing’. It’s supplied with foam inserts that can be used to optimise performance for the speaker’s position relative to the wall.

DynaudioEmit30+25C_Walnut_03

Danish-designed cabinetry

Emit 30’s cabinets are made from 18mm MDF to provide a solid, stable platform for the drivers to do their work. They’re internally damped with polyester fibre, measured down to the gram for exactly the right amount of resonance suppression.

On the outside, you can choose from three custom laminate finishes: Black, White or Walnut. They’ve been chosen to complement any room, in any configuration (so if you’re mixing and matching Emit speakers in a home cinema system, you can make them stand out or blend in as you want).

Emit 30: powerful floorstander performance in a compact package. If you want to take your listening to the next level, they’ll really make your collection sing.

DynaudioEmit30+25C+10_Walnut_02-1
DynaudioEmit30_Walnut_03-1
DynaudioEmit30+25C+10_Walnut_01-1
DynaudioEmit30_Walnut_01-1

Emit

Features

2022_Dynaudio_WebIcon_ConeGraphic_60x60px_Black

Designed and engineered in Denmark


The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned.

2022_Dynaudio_WebIcon_ConeGraphic_60x60px_Black

Cerotar tweeter


Emit uses the highly regarded Cerotar tweeter from our Evoke series. It's a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome.

2022_Dynaudio_WebIcon_ConeGraphic_60x60px_Black

Clean and simple


Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you're listening in stereo or have a full multi-channel system.

Emit 30

Specifications

  • Status Current
  • Segment Home
  • Series Emit
  • Type Floorstand
  • Sensitivity (dB @ 2.83V/1m) 88
  • IEC Power Handling (W) 180
  • Rated Impedance (Ohm) 4
  • Lower Cutoff (Hz @ +/- 3 dB) 55
  • Upper Cutoff (kHz @ +/- 3 dB) 25
  • Lower Cutoff (Hz @ -6 dB) 39
  • Upper Cutoff (kHz @ -6 dB) 35
  • Box Principle Bass reflex rear double flared port
Product-Lineart-Emit 30

Reviews

Audiograde


Audiograde's Andrew Simpson summarises his experience with Emit 30 so positively, that we felt the need to include his summary in its entirety.

"While the Emit 30 may seem entry level for this brand at the price, don’t be fooled into thinking this is an entry-level sounding speaker. Thanks to the trickle down tech that’s been harvested from Dynaudio’s more senior offerings, understated looks and no-nonsense design, what you get here is decades of knowhow brought together into an affordable package. These speakers sound dynamic, open and well balanced, making for an exceptional all-rounder at this price point."

Read what else Andrew has to say about Emit 30 via the button below.

Hi-Fi Class


Polish magazine Hi-Fi Class checked out Emit 30, with Arkadiusz Ogrodnik awarding it a "recommended" seal of approval. You can read the review in its entirety (po polsku or using your browser's translation tool) via the button below.

"(...) they are able to create such an atmosphere that it's difficult to tear oneself away from them. The music coming out of them combines characteristics of both standmounters and floorstanding speakers. The bass is extended with no lack of weight, while the midrange and treble are characterised by a punctuality and precision reminiscent of high-end monitors. In short, a recommendation!"

Audio Test


Emit 30 impresses the good folks at Audio Test, bringing home at "90% - excellent" seal of approval. You can read the full review (auf Deutsch or using your browser's translator tool) via the button below.

“To be honest, we were initially a little surprised by the hefty performance of this speaker in regards to its rather timid appearance. But then we remembered which manufacturer we were dealing with and just had to salute this speaker's absolutely outstanding musicality."

best-of-high-end

Best of high end


“Sometimes size does matter. The all-new Confidence 60, the flagship of the new Confidence family, towers above
the outgoing Confidence C4 model.”

Best of high end, Belgium

quote_white

We put the same attention to detail into developing all our products, and we share as much technology as we can across our ranges to bring authentic Dynaudio performance to every speaker we make. Emit might be the entry point, but it offers much more than just a glimpse into our high-end world.

Stephen Entwistle, Senior Acoustics Engineer, Product Manager

Find a dealer

Find your nearest Dynaudio dealer and pay them a visit today, or sign up for a listening session.

    Emit series

    • Status:
    • Segment:
    • Series:
    • Type:
    • Sensitivity (dB @ 2.83V/1m):
    • IEC Power Handling (W):
    • Rated Impedance (Ohm):
    • Lower Cutoff (Hz @ +/- 3 dB):
    • Upper Cutoff (kHz @ +/- 3 dB):
    • Lower Cutoff (Hz @ -6 dB):
    • Upper Cutoff (kHz @ -6 dB):
    • Box Principle:
    • Emit 10
    • Current
    • Home
    • Emit
    • Bookshelf
    • 86
    • 150
    • 6
    • 64
    • 25
    • 52
    • 35
    • Bass reflex rear double flared port
    • Emit 20
    • Current
    • Home
    • Emit
    • Bookshelf
    • 86
    • 160
    • 6
    • 53
    • 25
    • 42
    • 35
    • Bass reflex rear double flared port
    • Emit 25C
    • Current
    • Home
    • Emit
    • Center
    • 87
    • 180
    • 4
    • 53
    • 25
    • 46
    • 35
    • Bass reflex rear double flared port
    • Emit 30
    • Current
    • Home
    • Emit
    • Floorstand
    • 88
    • 180
    • 4
    • 55
    • 25
    • 39
    • 35
    • Bass reflex rear double flared port
    • Emit 50
    • Current
    • Home
    • Emit
    • Floorstand
    • 86
    • 240
    • 4
    • 33
    • 25
    • 28
    • 35
    • Bass reflex rear double flared port

    Dynaudio Magazine

    Dynaudio Magazine is our universe of sound and music-related articles, videos, and podcasts, covering everything from loudspeakers and technology to extraordinary people, and our very best tips and tricks.

    Read more
    Analogue vs. digital crossovers

    Analogue vs. digital crossovers

    This time on Ask The Expert, we'll be discussing whether digital crossovers really are an improvement over analogue crossovers or not. And, as you mig...

    Plugging the port on only one speaker. Go or no-go?

    Plugging the port on only one speaker. Go or no-go?

    On this episode of Ask The Expert, we're going to tackle a couple of questions relating to asymmetrically-shaped and asymmetrically-treated listening ...

    Using an external DAC with digital, active speakers – is it necessary?

    Using an external DAC with digital, active speakers – is it necessary?

    A surprisingly common question topic, on this episode of Ask The Expert Otto briefly clears up any confusion surrounding external DACs used in conjunc...