- Dynaudio FAQ
- Dynaudio Xeo | Frequently asked questions
- Xeo | FAQ - Surround / multichannel
-
Downloads - Manuals & Firmware
-
FAQ - Frequently Asked Questions
-
Passive speakers | Frequently asked questions
-
Home Audio | Focus
-
Dynaudio Music | Frequently asked questions
-
Dynaudio Xeo | Frequently asked questions
-
Dynaudio Focus XD | Frequently asked questions
-
Dynaudio Professional Audio | Frequently asked questions
-
Dynaudio Car Audio | Frequently asked questions
-
Dynaudio CI | Frequently Asked Questions
-
Home spare part
Can I use Xeo as a rear speaker?
Xeo can be used effectively as a wireless rear speaker (or front speaker), if a Xeo Transmitter / Hub / Connect or Xeo 2 is connected to the analog rear (or front) pre-out outputs of the surround receiver.
Theoretically, several Xeo Transmitter / Hub / Connect (set to ID A, B and C) or Xeo 2 can be connected to the front, center and rear outputs of the sound receiver, although the simultaneous use of multiple transmitters usually leads to sound dropouts, depending on the utilization of the wireless network and is therefore not recommended.